Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor

                     Interlock/selective Sw. - Proximity switch

                    Aux. contact of transducer / detector

 As I/O of S/W PLC Controller

 Industrial ON/OFF control

 Low speed counter

 Frequency counter

 Hardware event capture

Features

 PCIe plug and play function with card ID for 16 identical cards

 32 isolated DI and 32 isolated DO channels

 High voltage isolation on all isolated channel (2500 Vac)

 Programmable debounce at 50,100,200, 1K Hz and no de-bounce for input

 No output transition during start-up

 Output status readback

 External triggered interrupt (on IN07~IN00 and TTL IO07~IO00)

 Input counter / frequency counter (on IN07~IN00 and TTL IO07~IO00)

 Keep output state after hot reset (jumper selectable)

 Watch dog timer with default output on OUT07~OUT00

 32bit timer with time up interrupt

Specifications (With Matched Wiring Board)

Main Card -- Input Section

 Input channel : 32 isolated digital input

 ON state : 8Vdc(max) 4mA(min)

 OFF state : 12Vdc(min) 3mA(max)

 Software debounce : No debounce, 50Hz, 100Hz, 200Hz, 1KHz

 Switching speed : 10KHz max. (limit by photo coupler speed and debounce filter)

  Interrupt : IN07 ~ IN00, TTL IO07~IO00

 Counter/frequency counter : IN07~IN00, TTL IO07~IO00

Main Card -- Output Section

 Output channel : 32 isolated digital output

 Output capacity : 3A@250Vac, 30Vdc (Relay)

 Switching speed : 20KHz(max)(MOS out only)

                                 1A @ 24Vdc (PMOS)

                                 1A @ 120Vdc (NMOS) with wiring board

Main Card -- TTL IO

 Port : 2

 Direction : software programmable on port base

 Software debounce : No debounce, up to 8MHz

Main Card -- Timer

 Length : 32-bit @1us

 Interrupt : time up interrupt

Main Card -- General

 Card ID : 4-bit

 Insulation resistance : 100M Ohm(min) at 1000Vdc

 Isolation voltage : 2500Vac 1Min

 Connector : Centronic type SCSI II 68pin connector

 Operation temperature : 0 to +70 degree C

 Operation humidity : 5~95% RH, non-condensing

 Storage temperature : -20 to +80 degree C

 Dimensions : 165(W)*110(H) mm, 6.5(W)*4.4(H) in

DIN rail mounted wiring board

ADP8232DIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 Input : 32 with LED indicator, 8 digit per group with Green LED at first digit

 Output :

     ADP8232DIN(N) : 32 NMOS(Sink 1A @120Vdc) with LED indicator, 8 digit per group with Green LED at first digit

     ADP8232DIN(P) : 32 PMOS(Source 1A @24Vdc) with LED indicator, 8 digit per group with Green LED at first digit

     ADP8232DIN(R) : 32 Relay(3A @250Vac, 3A @30Vdc) with LED indicator, 8 digit per group with Green LED at first digit

  Power indicator : Red LED

 Operation temperature : 0 to 70 degree C

 Connector : One 68-pin SCSI II female connector

 Operation humidity : 5~95% RH, non-condensing

 Dimension : ADP8232DIN(N) : 121(W)*159(L)*47(H) mm, 4.8(W)*6.3(L)*1.9(H) in

                        ADP8232DIN(P) : 121(W)*159(L)*45(H) mm, 4.8(W)*6.3(L)*1.8(H) in

                        ADP8232DIN(R) : 121(W)*204(L)*45(H) mm, 4.8(W)*8.1(L)*1.8(H) in

JS51050 25PM DIN rail dummy wiring board

 Connection cable : D type 25P cable to connect main and wiring board

 Dimension :86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

 Driver, DLL, Demo and Example Program

Manual

Catalog

WinXP/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Labview

 Linux 3.0

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

 Driver

 Driver

 Driver

PRODUCT

DESCRIPTIONS

 1.

DIO8232

64-channel Digital I/O Card for 32 DI 32 DO Photo-coupler isolated with 16 TTL I/O

 2.

ADP8232DIN(N)

DIN rail mounted wiring board matched DIO8232 for 32 input and 32 power NMOS output

 3.

ADP8232DIN(P)

DIN rail mounted wiring board matched DIO8232 for 32 input and 32 power PMOS output

 4.

ADP8232DIN(R)

DIN rail mounted wiring board matched DIO8232 for 32 input and 32 power Relay output

 5.

M26J68681M5FW

68-pin SCSI II cable 1.5M for JF0

 6.

M26J68683M0FW

68-pin SCSI II cable 3.0M for JF0

 7.

JS51050

DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM0 TTL I/O

 8.

M270325X4

D type 25P male-female cable 1.5M for SM23404

 9.

M270325X4S

D type 25P male-female cable 1.5M, shielding for SM23404

 10.

M270325X0

D type 25P male-female cable 3.0M for SM23404

 11.

M270325X0S

D type 25P male-female cable 3.0M, shielding for SM23404

 12.

SM23404*

Extension kit for JM0 (bracket and flat cable for 25P female D type connector)